We are TRUSTMIG, a professional and trustworthy welding equipment company.
Language
DIGI-MULTI200ACDCPULS Welder is triple functional machine used as DC MMA/CUT ，AC
TIG, DC/PULSE TIG Welder.
All ferrous metals copper, Aluminium ,titanium and stainless steel material can be omnibearing welding in all position.The welding current is stable and stepless adjustable.The welding seam is nice. few spatter and low noise occurs during welding.The welder is small volume,light in weight and easy to move.It is particularly suitable for enterprise of pressure vessel,building,shipping and petrochemical works.
Phone:
+86 13811901793Email:
welding@alandwelding.comTelephone:
86 10 60716602Fax:
+86 10 60716642■ Digital Control IGBT inverter DC MMA,PulseACDC TIG and CUT.
■ Lift and HF for TIG
■ Hot arc start and arc force,Anti-stick for MMA
■ HF or with HF pilot arc for Plasma cutting.
■ 32 bits MCU inside
■ Foot pedal
■ 2T/4T function
■ Easy operation and normal selection for tig parameters..
■ AC and DC mix pulse TIG.
■ Advanced square,soft square,triangular,sine, four AC wave for selection.
■ VRD for MMA (Option).
■ PFC (option).
■ 10memories for selection.
MODEL | Digi-Multi 200 ACDC PULS | |
INPUT | Voltage | 1 xAC220V~240V 50Hz |
DC MMA | No-load Voltage | 70V |
| Base current Adjusting Range | 10~200A |
| Rated Output Current | 160A |
| Rated Duty Cycle | 60% |
AC TIG | No-load Voltage | 70V |
| Current Adjusting Range | 5~250A |
| SP % (AC balance) | 10~70 |
| AC Square Wave Frequency | 30~250Hz |
| Rated Duty Cycle | 60% |
DC TIG | Current Adjusting Range | 5~250A |
| Rated Duty Cycle | 60% |
Standard PULSE TIG | Peak Current | 5~200A |
| Base/peak Current ratio | 5~95% |
| Rated Duty Cycle | 60% |
| Pulse width | 5%~95% |
| pulse Freq. | 0.1~500Hz@DC |
Advanced PULSE TIG(MIX) | AC peak Current | 5~200A |
| DC(base)/AC peak Current Ratio | 5~95% |
| Rated Duty Cycle | 60% |
| Pulse width | 5%~95% |
| pulse (AC to DC-) Freq. | 0.1~10Hz |
Current UP/Down-slope Time | 0~10S | |
Initial current/weldingcurrent | 5~150% | |
crater-fill current/welding current | 5~95% | |
Pre gas Flow Time | 0~25s | |
Post gas Flow Time | 0~25s | |
Arc starting Mode | HF/LIFT TIG | |
CUT | current Adjusting Range | 20~50A |
| Rated Duty Cycle | 60% |
| Post gas Flow Time | 20~60s |
Efficiency | ≥80% | |
Mass | 26kg | |
Protection Class of enclosure | IP21S | |
Outline Dimensions mm3 | 430x200x290 | |
Copyright © 2021 Beijing Aland Welding Co.,Ltd. - All Rights Reserved.